Skip to main content
Version: 2.9.1

Hosts with Most Policy Violations for Palo Alto Networks (10032 / 20032)

Description​

This Module utilizes Palo Alto Networks NetFlow v9 reporting and provides a list of top firewall policies violators. Top violators are reported by Network Device and by Destination Port over a time interval. The number of reported top violators (N) and the observation interval (T, sec) are configurable. This information is provided per NetFlow exporter.

Parameters​

Parameter NameDescriptionComments
Data Collection Interval, secModule logic execution intervalmin = 10 sec, max = 600 sec, default = 30 sec
Application protocol (l4_dst_port) listList of watched layer 4 destination ports. If specified, the traffic is reported by specified ports, and all other traffic is summed up under dest_port=0. If the list is empty, the traffic is reported by all actual destination ports.e.g. 80, 443
N – number of reported hostsTop N (number of reported destinations)min = 0, max = 100000, default = 50 (0 indicates all hosts are reported)
Enable(1) or disable (0) reporting by destination portIf set to 1, enable network traffic monitoring by destination port. If set to 0, report total network traffic as destination port 0 (dest_port=0)default = 0
M – maximum number of destination ports to reportTop number of ports to reportmin = 1, max = 50, default = 10

Inputs​

Palo Alto Networks NetFlow v9.

Syslog/JSON Message Fields​

KeyField DescriptionComments
nfc_idMessage type identifierβ€œnfc_id=20032”
exp_ipNetFlow exporter IPv4 address<IPv4_address>
src_ipSource host IPv4 address<IPv4_address>
src_ip6Source host IPv6 address<IPv6_address>
dest_ipDestination host IPv4 address<IPv4_address>
dest_ip6Destination host IPv6 address<IPv6_address>
dest_portDestination port number (e.g. 80 for http)<number>
userUser-ID<string> (β€œna” if not available)
denied_countDenied flows count<number>
t_intObservation time interval, msec<number>