Top Connections Monitor (10063 / 20063)

Description

This Module identifies hosts with the most connections. It consolidates NetFlow records over a period of time (Module execution interval) which all have the same combination of the following fields:

• Source IP address
• Destination IP address
• Source port number
• Destination port number
• Layer 3 protocol
• Input interface
• Output interface

This information is provided per NetFlow exporter.

Deduplication: optionally the Module can report consolidated flows only from authoritative router/switch. Authoritative network device is determined as follows. The Module sums up bytes, packets, and connections between two hosts over data collection interval (parameter, default = 30 sec), reported by each flow exporter. An exporter with most connections (flows) for each consolidated flow is considered authoritative, and flows reported by all other exporters are discarded.

Parameters

Parameter Name	Description	Comments
Data Collection Interval, sec	Module logic execution interval	min = 5 sec, max = 600 sec, default = 30 sec
N – number of reported hosts	The number of top hosts reported per NetFlow exporter	min = 0, max = 100000, default = 50 (0 indicates all hosts are reported)
Enable(1) or disable (0) reporting flow denied events	If set to 1, enable reporting firewall denied flows. If set to 0, firewall denied flows are not reported	default = 1
Enable(1) or disable (0) reporting by authoritative exporters only	If set to 1 (deduplication enabled), the Module reports flows only from authoritative exporters	default = 0
Enable(1) or disable (0) reporting client port	If set to 1, the ephemeral client port number is reported. If set to 0, client port number is not taken into account for consolidation, and reported as 0	default = 1
Enable(1) or disable (0) multiplying by sampling rate	If set to 1, when *flow is sampled (e.g. sFlow, sampled NetFlow/IPFIX), the sampling rate is used to multiply bytes and packets to report total traffic as statistical approximation	default = 0
Default sampler rate	If sampling information is not available, use this rate to multiply bytes and packets to report total traffic as statistical approximation	default = 1

Input

NetFlow v5, v9, IPFIX, Cisco ASA NSEL, Palo Alto Networks NetFlow v9, sFlow.

Required NetFlow fields

Information Element (IE)	IE id	IE size, B	Description
IPv4
sourceIPv4Address	8	4	The IPv4 source address in the IP packet header
destinationIPv4Address	12	4	The IPv4 destination address in the IP packet header
IPv6
sourceIPv6Address	27	16	The IPv6 source address in the IP packet header
destinationIPv6Address	28	16	The IPv6 destination address in the IP packet header

Syslog/JSON Message Fields

Key	Field Description	Comments
nfc_id	Message type identifier	"nfc_id=20063"
exp_ip	NetFlow exporter IPv4 address	IPv4 address
exp_ip6	NetFlow exporter IPv6 address	IPv6 address
input_snmp	NetFlow exporter ingress interface SNMP index	number
output_snmp	NetFlow exporter egress interface SNMP index	number
protocol [^1]	Transport Protocol (TCP = 6, UDP = 17)	number
src_ip	Source host IPv4 address	IPv4 address
src_ip6	Source host IPv6 address	IPv6 address
src_host [^2]	Source host name	string, included when FQDN is on
src_port	Source port number	number
dest_ip	Destination host IPv4 address	IPv4 address
dest_ip6	Destination host IPv6 address	IPv6 address
dest_host [^2]	Destination host name	string, included when FQDN is on
dest_port	Destination port number	number
tcp_flag	Cumulative OR of TCP flags	string, e.g. SYN,ACK,FIN
packets_in	Packets in the flow received by the input interface	number
bytes_in	Total number of Layer 3 bytes in the packets of the flow received by the input interface	number
src_tos	Inbound IP type of service	number
dest_tos	Outbound IP type of service	number
src_asn	Source AS	number
dest_asn	Destination AS	number
flow_count	Number of flows	number
action [^3]	Flow action	string, The action is determined from IPFIX element 233 - firewallEvent and NFv9 / IPFIX element 89 - forwardingStatus
percent_of_total	Percent of Total (flow_count)	decimal, e.g. 25.444% is 25.444
flow_smpl_id	Flow Sampler ID	number
t_int	Observation time interval, msec	number

[^1] Protocol field is optional. It is reported only if there is a corresponding field in NetFlow.
[^2] Host name field is optional and included only if FQDN Service is enabled.
[^3] Action is reported as follows:

• action=blocked for firewallEvent 0 (ignored), 2 (deleted), and 3 (denied)
• action=allowed for firewallEvent 1 (created), 4 (alert), and 5 (update)
• action=unknown for forwardingStatus 00
• action=forwarded for forwardingStatus 01
• action=dropped for forwardingStatus 10
• action=consumed for forwardingStatus 11